Idle Air Control Valve IACV / Speed Motor CHEVROLET GMC 17076250 17113134 AC122 AC51 CV10038

Item specifics

Condition: New Brand: Unbranded

Reference OE/OEM

Number:

17076250 17113134 AC122 AC51 CV10038 Model:

For CHEVROLET, For GMC

 

Specifications

· - Stock parts direct replacement.

· - 100% test before shipment.

· - The key parts including chip from top supplier.

· - Mounting style: Threaded-in.

· - Accept urgent order.

· - Develop other special and new type of auto spare parts according to the customers design drawings,samples and specifications
 

 

Warranty & Returns

We fully guarantee customers an exchange or refund within 14 business days of receipt if item DOA (damage on arrival).
Warranty excludes normal product lifetime wear-out, wear and tear or abuse.
Warranty does not apply to conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation or alteration.
For malfunction products under warranty period, please contact our customer service Message.
If you have any questions, pls feel free contact us.

 

 

Installation Notes

  1. Remove the throttle body. Refer to Fuel System for instructions.

  2. Remove the stepper motor.

  3. Fasten the test harness to the idle air control motor harness connector.

  4. Connect the positive (+) terminal of a power source (approximately 6 V) to the white or the green clip.

  5. While holding the idle air control motor as shown in the illustration, connect a negative (-) power source terminal to each clip in the following sequence, and check whether there is vibration of the stepper motor as a result of activation of the stepper motor.

  • Connect the negative (-) power source terminal to the red and black clips.
  • Connect the negative (-) power source terminal to the blue and black clips.
  • Connect the negative (-) power source terminal to the blue and yellow clips.
  • Connect the negative (-) power source terminal to the red and yellow clips.
  • Connect the negative (-) power source terminal to the red and black clips.
  • Repeat the test in the reverse (e through a) sequence.

     6.  If vibration is felt as a result of this test, the stepper motor can be considered to be normal.

         Idle Air Control Valve IACV / Speed Motor CHEVROLET GMC 17076250 17113134 AC122 AC51 CV10038

  The location of the idle air control motor-3.0L and 3.5L engines

    Idle Air Control Valve IACV / Speed Motor CHEVROLET GMC 17076250 17113134 AC122 AC51 CV10038

Test the idle air control motor for vibration when the harness is connected to it-3.0L and 3.5L engines

     Idle Air Control Valve IACV / Speed Motor CHEVROLET GMC 17076250 17113134 AC122 AC51 CV10038

Use Mitsubishi tool MD998463 to test the idle air control motor-3.0L and 3.5L engines

 

REMOVAL & INSTALLATION

       To remove the idle air control motor, the throttle body must first be removed from the intake manifold plenum. Once the throttle body has been removed, the stepper motor unbolts from the it. Label any hoses or cables removed and save the bolts and nuts for re-installation. Attach the new stepper motor to the throttle body. Tighten to 8-10 ft. lbs. (12-14 Nm). Install any parts removed for access to the throttle body.

 

Products

Idle Air Control Valve / Speed Motor

Call Us
Contact Supplier
Change Language